Stick-in Electrode Pin PairM 20-HW 200
Ref.Nr. 31004350
Electrodes for resistance-based moisture measurements in chips, wood wool, veneer stacks, and bulk materials
M 20-HW 200
Have questions?Description
The M 20-HW 200 Stick-in electrode pin pair is used for resistance-based moisture measurements in chips, wood wool, veneer stacks, and bulk materials.
The measuring electrodes are made of stainless steel and are therefore robust and resilient. No rust, which might soil the surface and affect the contact to the material to be measured, can form.
As they are uninsulated, a large contact area is ensured. This reduces the risk of incorrect measurements and increases the reliability of the measurement results.
Usecases
Measuring ranges
The electrode pair can be used with all hydromettes based on the resistance measurement method.
Resistance-based measuring
Measuring Ranges
min.4 to max.100 % (dry mass)
min.31 to max.41 % water content
The actual measuring range depends on the connected measuring instrument.
Show compatible measuring instrumentsSpecifications
Pins: 200 mm (length) and 4 mm (diameter)
Carrier SystemNeeds one of these carrier systems
min.4 to max.100 % (dry mass)
min.31 to max.41 % water content
Ranges depend on connected measuring instrument
min.0 to max.80 digits
min.0,3 to max.42.2 wt.-%
min.0,3 to max.12 CM-%
Ranges depend on connected measuring instrument
Compatible instrumentsCan be used with these measuring instruments
4 to 100 % (dry mass)
0 to 199 digits
0,3 to 8,5 wt.-%
0,3 to 6,5 CM-%
0,3 to 25 wt.-%
0,3 to 12 CM-%
0 to 100 % R.H.
±1,8 (10 to 90 % R.H.) Sensor Accuracy
-20 to 80 °C
±0,3 (-10 to 70 °C) Sensor Accuracy
-40 to 380 °C
±0,5 (0 to 60 °C) Sensor Accuracy
-50 to 250 °C
-30 to 170 °C
-2,5 to 2,5 m/s
