Wood Moisture

Modification Set
M 20-DS 16

Ref.Nr. 31004310
For moisture measurements in wood of up to 30 mm in thickness
Description

Description

The modification set  is used for moisture measurements in wood of up to 30 mm in thickness. The particularly slim pins (1.6 mm [Ø]) leave hardly visible punctures in the material (e.g. in mopboards or veneer)

Measuring ranges

Wood Moisture
The modification set can be used with all hydromettes based on the resistance measurement method.
Resistance-based measuring
Resistance-based measuring
Measuring Ranges
min.4 to max.100 % (dry mass)
min.31 to max.41 % water content

The actual measuring range depends on the connected measuring instrument.

Show compatible measuring instruments

Specifications

Consisting of:

  • 2 cap nuts M 20-05 (Ø 1.6 mm)
  • 50 replacement pins (Order no. 31004600)

Carrier SystemNeeds one of these carrier systems

Wood MoistureStructural Moisture
12 Measuring instruments compatible2 Usecases
M 20
min.4 to max.100 % (dry mass)
min.31 to max.41 % water content

Ranges depend on connected measuring instrument

min.0 to max.80 digits
min.0,3 to max.42.2 wt.-%
min.0,3 to max.12 CM-%

Ranges depend on connected measuring instrument

Compatible instrumentsCan be used with these measuring instruments

Wood MoistureStructural MoistureAir HumidityAir TemperatureSurface TemperatureMaterial TemperatureAir Speed
33 Electrodes selectable
CH 17
4 to 100 % (dry mass)
0 to 199 digits
0,3 to 8,5 wt.-%
0,3 to 6,5 CM-%
0,3 to 25 wt.-%
0,3 to 12 CM-%
0 to 100 % R.H.
±1,8 (10 to 90 % R.H.) Sensor Accuracy
-20 to 80 °C
±0,3 (-10 to 70 °C) Sensor Accuracy
-40 to 380 °C
±0,5 (0 to 60 °C) Sensor Accuracy
-50 to 250 °C
-30 to 170 °C
-2,5 to 2,5 m/s
Wood Moisture
6 Electrodes selectable
BL H 40
5 to 40 % (dry mass)
Wood Moisture
8 Electrodes selectable
BL H 41
5 to 40 % (dry mass)
4.5 to 45 % (dry mass)
Wood MoistureMaterial Temperature
7 Electrodes selectable
BL HT 70
5 to 70 % (dry mass)
31 to 41 % water content
-50 to 250 °C
Wood Moisture
6 Electrodes selectable
BL A plus
5 to 50 % (dry mass)
5 to 70 % (dry mass)
Structural MoistureWood MoistureSurface TemperatureMaterial Temperature
21 Electrodes selectable
BL E
0.1 to 42.2 wt.-%
0.2 to 9.9 CM-%
0 to 200 digits
5.5 to 58 % (dry mass)
-50 to 250 °C
-50 to 350 °C
Wood Moisture
6 Electrodes selectable
H 35
4 to 30 % (dry mass)
Wood Moisture
6 Electrodes selectable
HT 65
4 to 60 % (dry mass)
Wood MoistureStructural MoistureSurface Temperature
21 Electrodes selectable
HB 30
4 to 30 % (dry mass)
0 to 80 digits
0.5 to 25 wt.-%
0.3 to 12 CM-%
0 to 199 digits
0.3 to 8.5 wt.-%
0.3 to 6.5 CM-%
-20 to 199.9 °C
Wood MoistureStructural MoistureAir TemperatureSurface TemperatureMaterial Temperature
29 Electrodes selectable
HT 85 T
4 to 100 % (dry mass)
0 to 80 digits
0.5 to 25 wt.-%
0.3 to 12 CM-%
-20 to 200 °C
-50 to 250 °C
-50 to 350 °C
Wood MoistureStructural MoistureAir HumidityAir TemperatureSurface TemperatureMaterial Temperature
41 Electrodes selectable
RTU 600
4 to 100 % (dry mass)
0 to 80 digits
0.5 to 25 wt.-%
0.3 to 12 CM-%
0 to 199 digits
0.3 to 8.5 wt.-%
0.3 to 6.5 CM-%
0 to 100 % R.H.
-20 to 200 °C
-20 to 70 °C
-50 to 600 °C
-20 to 199.9 °C
-50 to 600 °C

Replacement parts

Electrode Pins without insulation 20 mm
Electrode Pins without insulation 20 mm
31004600

Your question about this product

Stay informed about
GANN products & services