Stick-in Electrode Pin PairM 6-150
Ref.Nr. 31003706
Extra thin probes for measuring moisture content over expansion joints or through intersecting tile joints
Description
The Stick-in electrode pins M 6-150 are used for measuring the moisture content in building and insulating materials. Due to the extra thin probes (150 x 3 mm Ø) it is possible to measure over expansion joints or through intersecting tile joints.
Measuring ranges

The electrode pair can be used with all hydromettes based on the resistance measurement method.

Resistance-based measuring
Measuring Ranges
min.0 to max.80 digits
min.0,3 to max.42.2 wt.-%
min.0,3 to max.12 CM-%
The actual measuring range depends on the connected measuring instrument.
Show compatible measuring instrumentsSpecifications
- The tips are uninsulated and thus provide a large contact area. This reduces the risk of incorrect measurements and increases the reliability of the measurement results
- Ø 3 mm
Length | 0.150 m0.492 ft (0.150 m) |
Carrier SystemNeeds one of these carrier systems

min.0 to max.80 digits
min.0,3 to max.42.2 wt.-%
min.0,3 to max.12 CM-%
Ranges depend on connected measuring instrument

min.4 to max.100 % (dry mass)
min.31 to max.41 % water content
Ranges depend on connected measuring instrument

min.0 to max.80 digits
min.0,3 to max.42.2 wt.-%
min.0,3 to max.12 CM-%
Ranges depend on connected measuring instrument
Compatible instrumentsCan be used with these measuring instruments

4 to 100 % (dry mass)

0 to 199 digits
0,3 to 8,5 wt.-%
0,3 to 6,5 CM-%

0,3 to 25 wt.-%
0,3 to 12 CM-%

0 to 100 % R.H.
±1,8 (10 to 90 % R.H.) Sensor Accuracy

-20 to 80 °C
±0,3 (-10 to 70 °C) Sensor Accuracy

-40 to 380 °C
±0,5 (0 to 60 °C) Sensor Accuracy

-50 to 250 °C

-30 to 170 °C

-2,5 to 2,5 m/s