Task

Moisture measuring of hard (screed or concrete) and soft (e.g. gypsum or plaster) building materials with a maximum measuring depth of 70 mm

Structural Moisture - Resistance-based measuring

Using contact paste and pre-drilled holes.

Get in touch
Solution

You need this electrode

Structural Moisture
M 6
6 Measuring instruments compatible
M 6
min.0 to max.80 digits
min.0,3 to max.42.2 wt.-%
min.0,3 to max.12 CM-%

Ranges depend on connected measuring instrument

one of these measuring instruments

Wood MoistureStructural MoistureAir HumidityAir TemperatureSurface TemperatureMaterial TemperatureAir Speed
CH 17
MultiCombi
33 Electrodes selectable
CH 17
4 to 100 % (dry mass)
0 to 199 digits
0,3 to 8,5 wt.-%
0,3 to 6,5 CM-%
0,3 to 25 wt.-%
0,3 to 12 CM-%
0 to 100 % R.H.
±1,8 (10 to 90 % R.H.) Sensor Accuracy
-20 to 80 °C
±0,3 (-10 to 70 °C) Sensor Accuracy
-40 to 380 °C
±0,5 (0 to 60 °C) Sensor Accuracy
-50 to 250 °C
-30 to 170 °C
-2,5 to 2,5 m/s
Structural MoistureWood MoistureSurface TemperatureMaterial Temperature
BL E
MultiCombi
21 Electrodes selectable
BL E
0.1 to 42.2 wt.-%
0.2 to 9.9 CM-%
0 to 200 digits
5.5 to 58 % (dry mass)
-50 to 250 °C
-50 to 350 °C
Wood MoistureStructural MoistureSurface Temperature
HB 30
MultiCombi
21 Electrodes selectable
HB 30
4 to 30 % (dry mass)
0 to 80 digits
0.5 to 25 wt.-%
0.3 to 12 CM-%
0 to 199 digits
0.3 to 8.5 wt.-%
0.3 to 6.5 CM-%
-20 to 199.9 °C
Wood MoistureStructural MoistureAir TemperatureSurface TemperatureMaterial Temperature
HT 85 T
MultiCombi
29 Electrodes selectable
HT 85 T
4 to 100 % (dry mass)
0 to 80 digits
0.5 to 25 wt.-%
0.3 to 12 CM-%
-20 to 200 °C
-50 to 250 °C
-50 to 350 °C
Structural MoistureAir HumidityAir TemperatureSurface TemperatureMaterial Temperature
UNI 2
MultiCombi
37 Electrodes selectable
UNI 2
0 to 80 digits
0.5 to 25 wt.-%
0.3 to 12 CM-%
0 to 199 digits
0.3 to 8.5 wt.-%
0.3 to 6.5 CM-%
0 to 100 % R.H.
-20 to 200 °C
-20 to 70 °C
-50 to 600 °C
-20 to 199.9 °C
-50 to 600 °C
Wood MoistureStructural MoistureAir HumidityAir TemperatureSurface TemperatureMaterial Temperature
RTU 600
MultiCombi
41 Electrodes selectable
RTU 600
4 to 100 % (dry mass)
0 to 80 digits
0.5 to 25 wt.-%
0.3 to 12 CM-%
0 to 199 digits
0.3 to 8.5 wt.-%
0.3 to 6.5 CM-%
0 to 100 % R.H.
-20 to 200 °C
-20 to 70 °C
-50 to 600 °C
-20 to 199.9 °C
-50 to 600 °C

These usecases might also interest you

Structural Moisture Resistance

Measuring the moisture content in soft, set building materials e.g. plaster, gypsum or aerated concrete up to max. 70 mm measuring depth

Structural Moisture Resistance

Measuring moisture in solid building materials such as walls, floors or ceilings without using a contact agent

2 Produkte zur Auswahl
Structural Moisture Resistance

Moisture measuring in the footstep sound or thermal insulation under a screed layer in the edge joint

2 Produkte zur Auswahl
Structural Moisture Resistance

Measuring the moisture of an insulation material in the edge joint of a screed covering

2 Produkte zur Auswahl
Structural Moisture Resistance

Creating moisture profiles or measuring at different depths in a wall, ceiling or floor

2 Produkte zur Auswahl

Your question about our products

Stay informed about
GANN products & services