Task

Measuring moisture on surfaces (e.g. concrete, plaster or screed) and in near surface areas

Structural Moisture - Resistance-based measuring

The measuring depth is approx. 3 mm, the surface of the material to be measured is not damaged. 

Get in touch
Solution

You need this electrode

Wood Moisture
Structural Moisture
M 20-OF 15
Carrier system: M 20
12 Measuring instruments compatible2 Usecases
M 20-OF 15
min.4 to max.100 % (dry mass)
min.3.1 to max.41 % water content

Ranges depend on connected measuring instrument

min.0 to max.87 digits
min.0.1 to max.60 wt.-%
min.0.1 to max.12 CM-%

Ranges depend on connected measuring instrument

31004315

one of these measuring instruments

CH 17
32 Electrodes selectable
CH 17
4 to 100 % (dry mass)
0 to 200 digits
0.3 to 8.5 wt.-%
0.3 to 6.5 CM-%
0.3 to 25 wt.-%
0.3 to 12 CM-%
0 to 100 % R.H.
±1.8 (10 to 90 % R.H.) Sensor Accuracy
-20 to 80 °C
±0.3 (0 to 60 °C) Sensor Accuracy
-40 to 380 °C
±0.5 (0 to 60 °C) Sensor Accuracy
-50 to 250 °C
-30 to 170 °C
-2,5 to 2,5 m/s
30003150
BL E
21 Electrodes selectable
BL E
0.1 to 42.2 wt.-%
0.1 to 9.6 CM-%
0.7 to 60 wt.-%
2.3 to 87 digits
0 to 200 digits
5.5 to 58 % (dry mass)
-50 to 250 °C
-50 to 350 °C
30011300
HB 30
21 Electrodes selectable
HB 30
4 to 30 % (dry mass)
0 to 80 digits
0.5 to 25 wt.-%
0.3 to 12 CM-%
0 to 199 digits
0.3 to 8.5 wt.-%
0.3 to 6.5 CM-%
-20 to 199.9 °C
30001510
HT 85 T
29 Electrodes selectable
HT 85 T
4 to 100 % (dry mass)
0 to 80 digits
0.5 to 25 wt.-%
0.3 to 12 CM-%
-20 to 200 °C
-50 to 250 °C
-50 to 350 °C
30001370
UNI 2
37 Electrodes selectable
UNI 2
0 to 80 digits
0.5 to 25 wt.-%
0.3 to 12 CM-%
0 to 199 digits
0.3 to 8.5 wt.-%
0.3 to 6.5 CM-%
0 to 100 % R.H.
-20 to 200 °C
-20 to 70 °C
-50 to 600 °C
-20 to 199.9 °C
-50 to 600 °C
30001550
RTU 600
41 Electrodes selectable
RTU 600
4 to 100 % (dry mass)
0 to 80 digits
0.5 to 25 wt.-%
0.3 to 12 CM-%
0 to 199 digits
0.3 to 8.5 wt.-%
0.3 to 6.5 CM-%
0 to 100 % R.H.
-20 to 200 °C
-20 to 70 °C
-50 to 600 °C
-20 to 199.9 °C
-50 to 600 °C
30001670

These usecases might also interest you

Structural Moisture Resistance

Measuring the moisture content in soft, set building materials e.g. plaster, gypsum or aerated concrete up to max. 70 mm measuring depth

Structural Moisture Resistance

Moisture measuring of hard (screed or concrete) and soft (e.g. gypsum or plaster) building materials with a maximum measuring depth of 70 mm

Structural Moisture Resistance

Measuring moisture in solid building materials such as walls, floors or ceilings without using a contact agent

2 Produkte zur Auswahl
Structural Moisture Resistance

Moisture measuring in the footstep sound or thermal insulation under a screed layer in the edge joint

2 Produkte zur Auswahl
Structural Moisture Resistance

Measuring the moisture of an insulation material in the edge joint of a screed covering

2 Produkte zur Auswahl

Your question about our products

Stay informed about
GANN products & services