Stick-in ElectrodeM 19
Ref.Nr. 31003400
Electrode used for measuring moisture of finished thermal insulation composite systems
M 19
Have questions?Description
The M 19 push-in electrode is used for measuring in finished thermal insulation composite systems.
It is equipped with teflon insulated electrode pins (10 pieces 60 mm long are included in delivery).
The electrode body is made out of an impact-resistant plastic.
Measuring ranges
Resistance-based measuring
Measuring ranges
min.4 to max.100 % (dry mass)
The actual measuring range depends on the connected measuring instrument.
Show compatible measuring instrumentsSpecifications
Wood fibre insulants:
- In combination with a Hydromette BL H 41 the moisture content of wood fibre insulants can be measured
- The insulated electrode pins enable measuring even in plastered insulation boards
Thermal insulation composite systems:
Comparative measurements are possible with
- EPS (expanded polystyrene)
- Mineral wood
- Mineral insulation boards
- XPS rigid foam
- PUR rigis foam
- Cellulose
- Perlite
- Hemp/Flax
Compatible instrumentsCan be used with these measuring instruments
4 to 100 % (dry mass)
0 to 200 digits
0.3 to 8.5 wt.-%
0.3 to 6.5 CM-%
0.3 to 25 wt.-%
0.3 to 12 CM-%
0 to 100 % R.H.
±1.8 (10 to 90 % R.H.) Sensor Accuracy
-20 to 80 °C
±0.3 (0 to 60 °C) Sensor Accuracy
-40 to 380 °C
±0.5 (0 to 60 °C) Sensor Accuracy
-50 to 250 °C
-30 to 170 °C
-2,5 to 2,5 m/s
