Structural Moisture

Stick-in Electrode Pair
M 6

Ref.Nr. 31003700

Stick-in electrode pair for moisture measurements in hard and soft set building materials

DescriptionUsecases
DescriptionUsecases
M 6

Description

The M 6 stick-in electrode pair can be used for resistance-based structural moisture measurement in hard-set building materials (such as lime-sand brick, cement screed or concrete) or in soft building materials (such as mortar joints, plaster or drywall boards).

In addition, the electrode heads are used as carrier system for various other electrode pairs (see below).

When measuring hard building materials, predrilling is recommended and contact mass should be used to improve the conductivity between the measured material and electrode pins.
The electrodes should always be used in pairs and optimally placed at a distance of approx. 8 to 10 cm from each other in the material to be measured.

Measuring ranges

Resistance-based measuring
Resistance-based measuring
Measuring ranges
min.0 to max.87 digits
min.0.1 to max.60 wt.-%
min.0.1 to max.12 CM-%

The actual measuring range depends on the connected measuring instrument.

Show compatible measuring instruments

Specifications

  • Including 10 electrode pins of 40 and 60 mm in length

Compatible instrumentsCan be used with these measuring instruments

32 Electrodes selectable
CH 17
4 to 100 % (dry mass)
0 to 200 digits
0.3 to 8.5 wt.-%
0.3 to 6.5 CM-%
0.3 to 25 wt.-%
0.3 to 12 CM-%
0 to 100 % R.H.
±1.8 (10 to 90 % R.H.) Sensor Accuracy
-20 to 80 °C
±0.3 (0 to 60 °C) Sensor Accuracy
-40 to 380 °C
±0.5 (0 to 60 °C) Sensor Accuracy
-50 to 250 °C
-30 to 170 °C
-2,5 to 2,5 m/s
21 Electrodes selectable
BL E
0.1 to 42.2 wt.-%
0.1 to 9.6 CM-%
0.7 to 60 wt.-%
2.3 to 87 digits
0 to 200 digits
5.5 to 58 % (dry mass)
-50 to 250 °C
-50 to 350 °C
21 Electrodes selectable
HB 30
4 to 30 % (dry mass)
0 to 80 digits
0.5 to 25 wt.-%
0.3 to 12 CM-%
0 to 199 digits
0.3 to 8.5 wt.-%
0.3 to 6.5 CM-%
-20 to 199.9 °C
29 Electrodes selectable
HT 85 T
4 to 100 % (dry mass)
0 to 80 digits
0.5 to 25 wt.-%
0.3 to 12 CM-%
-20 to 200 °C
-50 to 250 °C
-50 to 350 °C
37 Electrodes selectable
UNI 2
0 to 80 digits
0.5 to 25 wt.-%
0.3 to 12 CM-%
0 to 199 digits
0.3 to 8.5 wt.-%
0.3 to 6.5 CM-%
0 to 100 % R.H.
-20 to 200 °C
-20 to 70 °C
-50 to 600 °C
-20 to 199.9 °C
-50 to 600 °C
41 Electrodes selectable
RTU 600
4 to 100 % (dry mass)
0 to 80 digits
0.5 to 25 wt.-%
0.3 to 12 CM-%
0 to 199 digits
0.3 to 8.5 wt.-%
0.3 to 6.5 CM-%
0 to 100 % R.H.
-20 to 200 °C
-20 to 70 °C
-50 to 600 °C
-20 to 199.9 °C
-50 to 600 °C

Carrier SystemAlso serves as carrier system for various other electrode pairs

Carrier system: M 6, M 20
6 Measuring instruments compatible
M 6-150
Carrier system: M 6, M 20
6 Measuring instruments compatible
M 6-250
Carrier system: M 6
6 Measuring instruments compatible2 Usecases
M 6-Bi 200
Carrier system: M 6
6 Measuring instruments compatible2 Usecases
M 6-Bi 300
Carrier system: M 20, M 6
6 Measuring instruments compatible2 Usecases
M 20-Bi 200
Carrier system: M 20, M 6
6 Measuring instruments compatible2 Usecases
M 20-Bi 300

Replacement parts

Your question about this product

Stay informed about
GANN products & services